RIG MATS
8' x 40' rig mats
THREE BEAM STEEL RIG MATS
Our three beam steel mats are a perfect option for camp sites, heavy machinery roadways, etc.
There are two lengths available: 39′ and 20′

FOUR BEAM STEEL RIG MATS
Our four-beam steel mats provide the best surface for your camp or rig site. At 40′ x 20′, framed completely with I-beams and two middle support beams, this is our largest and strongest mat surface.
7’7” x 39’ 6” Rig Mat
3 – W6 x 15, 39′ 6″ rails
6 – W6 x 15, 39″ cross members
4 x 6″ tight grain wood decking
4 – 1/2″ thick cable retainer ends
4 – 8.5 tonne “fold down” lifting shackle

BAMBOO SWAMP MATS
Temporary access road and rig mats are designed specifically to reduce damage to sub-soils and lower reclamation costs. By offering bamboo, we are able to create a sustainable product for a sustainable use while improving the standard mat. Laminated Veneer Bamboo is an extremely high strength engineered product... it is 10 times stronger than wood in tension and 3 times stronger mechanically, and does not absorb water. All of this results in a lighter product, reducing your transport costs and increasing the number of mats you can move per day.



BAMBOO ACCESS MATS
For both our Bamboo and Hardwood mats we offer 8’ x 14’ size, with approximately 142 – 200 carriage bolts holding the pieces together. In addition to this product, we carry a bamboo swamp mat that is 1m x 5m, and lies horizontally to create an even path on the most uneven ground. The shorter span allows for dips and drops in the landscape, so that your trucks can get where they need to go without risking a 14’ hardwood mat cracking under the pressure.

MUD MATS
Unroll this lightweight product and witness the benefits:
Travel over muddy, swampy ground
Minimal ground disturbance
Reduce vehicle ground pressure up to 40 times
Low Flow material
Lower transport and cleaning costs
Minimal tracking of mud off site
Roll up when done
High tensile reinforcing ribs
Accommodating for multiple lengths and widths
Oil & Gas road construction and repair
Multiple industry applications (i.e. Golf Courses, Agriculture, Parks & Rec.)
SOIL SEPARATION
This material is suitable for use in constructing access roads over muskeg, separating and reinforcing base layers for parking structures, roadbeds and other general road building applications. Having a very high survivability rating for severe conditions, this material is an excellent choice when encountering poor soil conditions. The fabric is high strength, low flow material, pre-fabricated corduroy road.
LIMITED PRACTICAL USES
This high strength woven material is designed and constructed to meet demanding soil separation and reinforcement applications typical to Western Canada. It provides high strength qualities at a very competitive price. The best conditions to use this application depend on your sub soil. This product works at optimal efficiency the shallower the ground saturation is. If the ground is completely saturated greater than a foots depth then the product will not work as effectively and/or possibly fail.
REINFORCEMENT APPLICATIONS
Only use this application before the ground is rutted up. This material must be laid out before traffic disturbs moist or soft ground. The mats will fail if there are ruts under the it.
Mats are 8’ wide by 14’ long.
These mats are an excellent choice for lease roads.
TRASH & FLYGT PUMPS
Electric Submersible Pumps* available:
2" Trash 110V
3" Trash 240V
4" Trash 240V - 460V
6" Trash 240V - 460V
2" Transfer 110V
4" Transfer 240V - 460V
* all electric submersible pumps come with explosion proof switch boxes and arc tight plug ends.
Gas & Diesel Inline Trash / Transfer pumps
2" Gas Trash
3" Gas Trash
3" Diesel Transfer
WHEEL LOADERS
Hyundai HL757TM-9 Wheel Loaders come equipped with:

3 Yard Bucket
Pipe Grapple
Pallet Forks
Jib Crane
Tire chains
KEY FEATURES:
Tool Master
Wide Cab with Large Field of View
Easy-to-Read Color LCD Display
Auto plus Manual Reversing Fan
Variable Operating Modes
KEY SPECS:
Operating Weight 15000kg (33070 lb)
Net Power 127 kW (170 hp) @ 2100 rpm
Bucket Capacity 2.8 m3 (3.7 yd3)
Bucket Breakout Force 12800 kg (28220 lb)

LIGHT TOWERS & GENERATORS
6kw 30 gal fuel tank = approx. 68 hours runtime
8kw 30 gal fuel tank = approx. 68 hours runtime
20kw 80 gal fuel tank = approx. 150 hours runtime
- Able to run three phase power @ 240V
- All generators are ready with air shut offs

FLOC TANKS
400 BBL sloped bottom / gun line; pump hoist

400 BBL HOLDING TANKS
400BBL Upright equipped with:
steam coil
gauge board
man hole
ladder with safety line
WHEELED OFFICE TRAILERS
20 x 8 interterior
Tandem 6000 lbs axles
2-5/16" Bulldog coupler
125' 30 amp 125/240 volt cord
Thermal slider windows
Flourescent lighting
Surge Protector
3.1 Cubic foot fridge
Domestic microwave
Coleman 13500 BTU A/C
Vinyl covered office chair
Vinyl covered hide a bed
20" Toshiba TV
12V car stereo
Metal venetian blinds
Stelpro heaters
2 three drawer banks with locking system
DVD/VCR combo
Spare tire
Water cooler
Electric heat
INSULATED TARPS
12' x 20' Insulated Tarps
FROST REMOVAL / GROUND THAWING BOLIERS
Frost Teck equipment provides:
Fast, economical frost extraction at approx. 1 foot per 24 hours
NO surface disturbance
Minimum work area downtime
Leaves surface dry even on snow and ice covered areas
Quiet and safe, with no scalding steam or open flame
Environmentally friendly – no burning coal or diesel fumes
Units are fully monitored for safety shutdown
Ditchline thawing for easy excavation of gas, plumbing, & electrical services
Temporary dry heat
Areas up to 10,000 sq ft per unit (current capacity for 100,000 sq ft)
Equipment designed, manufactured, tested, & operated in harsh Western Canadian climate – for MAXIMUM Performance and Durability